Print Server; Setting The Ip Address From The Control Panel - Epson DFX-9000 Reference Manual

Print Server

You can use this printer as a network printer by installing a print
server in the printer's parallel interface port. See the
Administrator's Manual packaged with this option for
instructions on installation and use.
The following Printer Servers can be used:
❏ EpsonNet 10/100 Base Tx Int. Print Server 5 (C82434✼)

Setting the IP address from the control panel

Follow the steps below to get the IP address using the control
panel.
1. Turn on the printer.
2. Press the Menu (Tear Off and Top of Form) buttons to enter
the SelecType mode.
3. Press the ItemU (Font) or ItemD (Pitch) button to select the
Get IP address setting and set the setting to Panel using the
SetU (Tear Off) or SetD (Top of Form) button.
4. Press the ItemD (Pitch) button to select the IP byte 1.
5. Change the number for the IP byte 1 using the SetU (Tear
Off) or SetD (Top of Form) button.
6. Press the ItemD (Pitch) button to select the next byte and
change the number using the SetU (Tear Off) or SetD (Top
of Form) button.
7. Repeat step 6 until the number for the IP byte 4 is set.
Options and Consumables
6
6
6
6
6
6
6
6
6
6
6
6
165