Epson printer Network Manual page 83

Creating objects
1. From any NetWare client, log in to the server as an ADMIN. Make sure to log in with Bindery
connection.
Note:
If the client using for this setting has been logged in with NDS mode, press F4 key while PCONSOLE
is starting to switch to the bindery mode.
2. Run PCONSOLE. From the Available Options screen, select Print Queues and press Enter. Press
Insert and type the print queue name. Press Enter.
Note:
Since your clients need the print queue name you set here when they use the printer, announce the
print queue name to your clients.
3. From the Print Queue list, select the print queue name that you just entered and press Enter.
From the Print Queue Information list, select Queue Users and press Enter. Next, select
EVERYONE from the list. If EVERYONE is not in the list, press Insert and select EVERYONE
from the queue user list.
4. From the Available Options screen, select Print Servers and press Enter. Press Insert and type
the print server name. Press Enter.
5. Press Esc to exit PCONSOLE, and log out from the server.
6. Log in to the server as an ADMIN. Be sure to log in with NDS connection.
7. Start NWAdmin.
8. To create the Printer Object, click the container specified as the Bindery context and select Create
from the Object menu, then Printer. Type the printer name and click Create.
9. To assign the print queue, double-click the Printer object icon (created in step 8). The Printer
dialog box appears.
10. Click Assignments and then click Add. From the print queue list, select the queue (created in
step 2) and click OK.
11. Click Configuration in the Printer dialog box, and select Parallel from the Printer type
pull-down menu.
12. Click Communication. The Parallel Communication dialog box appears.
EPSON Network Guide
How To 83