Epson printer Network Manual page 84

13. Select LPT1 for Port; check Polled for Interrupts; and check Manual load (Remote from Print
Server) for Connection type, then click OK.
14. Click OK in the Printer dialog box.
15. To assign the printer, double-click the Print Server object icon (created in step 4). The Print Server
dialog box appears.
16. Click Assignments and then click Add. From the printer object list, select the printer object
(created in step 8) and click OK.
17. In the Print Server dialog box, select the assigned printer from the printer object list, and click the
Printer Number button to set the printer number from 0 to 15, then click OK.
18. To confirm the objects you have assigned, double-click the Print Server object icon. Click Print
Layout, and check that the print server, printer, and print queue are connected.
Configuring for NetWare using EpsonNet Config
1. Turn on your printer.
2. Load the print server from the file server's system console which the print queue volume is set.
>LOAD PSERVER print server name you set using PCONSOLE
3. Configure the network interface using EpsonNet Config. See the EpsonNet Config User's Guide
for details.
If NetWare objects are already created, you can also use EpsonNet Config with Web Browser.
See the EpsonNet Config with Web Browser help for details.
Using NDS Remote Printer Mode (NetWare 4.x/5.x/6.0)
Follow the steps below to make the printer environment using NWAdmin under NetWare 4.x,
IntranetWare, NetWare 5.x, or NetWare 6.0 with NDS mode.
Creating objects
1. From any NetWare client, log in to the target context of the NDS tree as an ADMIN.
2. Run the Administrator tool (NWAdmin).
EPSON Network Guide
How To 84