Change Iv; Iec Power Connection; Filling Ink Pen - HP -7035B Technical Manual

Page 6-7, Table 6-3, change DS 601 and F601 to read:
DS601
F601
Page 7-9, Figure 7-3, make the following change to the schematic:
Shielded 4-conductor cable and 3 additional color coded wires (white/blue, black and yellow) are replaced by a
shielded 7-conductor cable assembly. Pre-IEC receptacle for ac power connector also used.
8-10.

CHANGE IV

8-11. CARRIAGE ARM. Page 6-11, Figure 6-2, Legend,
delete, item 29, delete part no. for terminal
8-12. CHANGE V
8-13. PEN ASSEMBLY.
include the following: Slidewire cleaner, slidewire lubricant, 2
pens, 1 btl green ink, 1 btl red ink, ink filling, syringe, rear
8-4
1450-0123
2110-0063
1400-0085
FIGURE 8-3. IEC POWER CONNECTION
Page 1-4, Table 1-2, should
FIGURE 8-4. FILLING INK PEN
Indicator Light
Fuse, 0.75A, 2A 250V
Holder -Fuse
mating connector, appropriate graph paper, power cord (7.5 ft),
rack mounting brackets, dust cover, instruction manual.
Page 3-4, paragraph 3-34, 3-35, and Figure 3-3, replace with:
3-34.
3-35.
short of full.
inserting the syringe into the filler opening and
squeeze gently. See Figure 8-4.
08717
Sloan
75915
Littlefuse
75915
Littlefuse
INSTALL AN INK PEN
Use a hypodermic syringe; fill reservoir just
Force ink into the pen tip by fully
859-R-6
312.750
342004