Table of Contents
Advertisement
noTe:
For questions regarding reception, please contact the support hotline 0810 96 97 98 (throughout Austria
max. € 0.1/min, last updated 05/2014) or visit www.simplitv.at.
5.0 Quick GuiDe for usinG your receiver
This section of the manual deals with the most frequently used receiver functions.
To switch your receiver ON or to Standby, press q on the remote control. If you will not use the receiver for
a longer time, disconnect the power supply by unplugging the power adapter from the outlet or from the
receiver.
Choose a channel with pq or the ch+/ch- buttons. Alternatively, you can digit the channel number
with the 0~9 buttons on the remote control or press ok in viewing mode to display the channel list.
The volume can be adjusted with tu or v+/v-.
P+/P- enable you to scroll page wise in all list modes to make your channel or other selection as
comfortable as possible.
noTe:
5.1 switching the channels
There are three ways to switch channels:
1. Via direct input with the 0 ~ 9 buttons
2. Via the channel list
3. By using the buttons ch+/ch- or p q.
5.1.1 Direct input
For switching directly to a certain channel number you can press the channel number with the 0 ~ 9
buttons on the remote control. The number can be up to four digits long. Entering a number with less
than four digits is also possible. After entering a channel, wait a few seconds and the receiver will switch to
it.
5.1.2 switching channels in the channel list
For switching channels in the channel list make the following steps: Press ok in the channel display mode.
The channel list screen will appear on screen. Press pq to choose a channel and press ok. The channel
list disappears from the screen and the receiver displays your channel of choice. Additionally you can press
LisT to change the channel list mode in the channel list. You can edit My list in the Channel Manager. If you
are using the My list mode the same channel order is applied to the EPG.
5.1.3 switching between Tv, radio and favourite channels
The receiver supports the following channel lists:
The TV channel list.
The radio channel list.
Four lists with favourite channels: Movies, News, Sports and Music. For the details on creating favourite
lists, see section 6.1.2. channel Manager.
Press Tv/r to switch between TV and radio channels.
Press fAv for choosing favourites in the channel display mode and select a list by pressing tu. Select a
channel by pressing pq and press ok to confirm.
P8
Quick GuiDe for usinG your receiver
Your receiver is pre-activated for most of the digital terrestrial encrypted channels
broadcasted by the operator. Some channels are not included and require a
registration or a subscription. Use the included registration form or sign up online at
www.simplitv.at to register/subscribe.
15 minutes after the receiver has been set to standby mode, it switches into the deep
sleep mode. During this time, the receiver can be started up quickly. The start-up
from the power-saving mode takes about 30 seconds.
Advertisement
Table of Contents
