System Setup - THOMSON THT700 User Manual

Wizard again! When you delete channels, all system settings made earlier such as language preferences,
output settings, parental control settings will remain.

6.2 system setup

6.2.1 Language setting
In this menu you can set your language of choice for menus, audio and subtitles.
Menu Language:
Audio Language:
Subtitle Language:
6.2.2 output setting
In this menu you can set the output parameters of the receiver according to the connected TV set and for
the connected audio amplifier if applicable.
TV Mode:
Screen Mode:
HDMI Resolution:
Audio on HDMI:
Audio on S/PDIF:
6.2.3 osD settings
In this menu you can adjust the transparency level of menus and set the banner time-out.
6.2.4 Time settings
In this menu you can specify the synchronising method for date and time, manually set date and time and
set the duration for displaying the information banner.
P12
MAin Menu
Set according to your preferences.
Digital TV allows transmission of more than one audio track/language. If a
channel has multiple audio tracks/languages, the receiver will select the audio
track/language automatically according to your selection.
Digital TV allows transmission of more than one subtitle language. Select the
preferable subtitle language and the receiver will automatically show subtitles in
the selected language (availability depends on the operator). If you do not want
to display subtitles, adjust the setting to Off. Please consider that events may
contain "built in" subtitles which can't be disabled.
Mostly PAL is used in Austria. In some cases it might be required to use another
standard.
Adjust this setting in accordance with the aspect ratio of your TV set (4:3 or 16:9)
and the preferred conversion.
If a TV with 4:3 aspect ratio is connected the best mode is 4:3 LB. 4:3 will not
be converted and video in 16:9 will be converted to display it fully and without
geometrical distortion (black horizontal lines on the top and bottom of the
screen).
If a TV with 16:9 aspect ratio is connected the best mode is 16:9 PB. 4:3 will be
displayed without geometrical conversions (black vertical lines on the left and on
the right and bottom of the screen) and video in 16:9 will be displayed without
conversion and fill the whole screen.
Try the settings and find the variant which suits you best. Do not forget about the
possibility to manage the format from the menu of your TV (depends on your TV
model).
Allows you to change the resolution of the HDMI output. If the connected TV
does not support the set resolution you will see a black screen. In this case, wait
for 10-15 seconds without pressing any buttons on the remote control of the
receiver and the previous value will be recovered automatically.
Keep the factory default setting. Change only after consultation of our support /
service/ hotline.
Keep the factory default setting. Change only after consultation of our support /
service/ hotline.