Table of Contents
Advertisement
Problem
The standby mode indicator
does not light up.
No signal found.
No picture or sound.
Possible reason
The receiver is disconnected
from the mains.
The receiver is connected
to the main power via an
extension cord and the switch
on the extension cable is OFF.
The antenna is disconnected.
The antenna is damaged or
misaligned.
The cable between the antenna
and the receiver is damaged
or the cable is not connected
properly.
An active antenna is connected
that requires a power supply via
the signal cable.
The input on the TV was not
chosen corresponding to the
output of the receiver.
The plug is not connected
properly.
remedy
Check whether the power
adapter is connected to a
suitable outlet.
Check if the connector of the
power adapter is connected to
the receiver.
Turn on the power switch.
Connect the antenna cable.
Check the antenna and its
position.
Check the condition of
the cable and check that
everything is connected.
Activate the power to the
antenna in the menu of the
receiver.
Select the correct input of the
TV for connecting the receiver.
Check the cable.
Check that the cables are
properly connected to the
outputs of the TV and the
receiver. Disconnect the
receiver and the TV from the
mains. Disconnect the cable
that connects the receiver
and the TV from both devices.
Connect the cable again,
convince yourself that it is
properly connected and that
the cable is steadily plugged
into the ports.
TROUBLESHOOTING
P15
Advertisement
Table of Contents
