Replacement Parts - Model Tech P-5IB Mustang Old Crow User Manual

Modellbau Lindinger GmbH
flap CoNTrol sysTeM
q (2) 2-5/8" (67mm) Threaded Pushrod Wires with 90º Bends
q (2) Nylon Control Horns
q (2) Metal Clevises
q (2) Nylon Snap-Keepers
q (4) M2 x 10mm Wood Screws
q (2) M2 Hex Nuts
q (6) Hinge Points
fuel TaNK asseMbly
q (1) 360cc Fuel Tank
q (3) Aluminium Tubes
q (1) Rubber Stopper
q (1) Metal Plate - Small
q (1) Metal Plate - Large
q (1) Fuel Pick-up (Clunk)
q (1) Silicone Fuel Tubing
q (1) Metal Support Ring
q (1) M3 x 20mm Machine Screw
MIsCellaNeous parTs
q (1) Radiator Scoop
q (1) Hardwood Wing Joiner
q (1) Wing Fairing
q (1) Plywood Engine Mount Support Plate
q (2) M5 x 70mm Machine Screws
q (2) M5 Flat Washers
q (1) 1.5mm Hex Wrench
q (1) Decal Set (Not Pictured)
q (16) M2 x 10mm Flange-Head Wood Screws
The following replacement parts are available for purchase. If you need to order replacement parts, we recommend ordering directly
from your local hobby retailer.
If your hobby retailer does not stock Model Tech products, you can order replacement parts directly
from your local distributor, using the Customer service Information sheet included with your kit.
Instruction Manual ...................................................................115985
Fuselage with Cockpit Floor .......................................................115986
Wing Panels with Flaps and Ailerons ..........................................115987
Fiberglass Cowl ........................................................................115988
Fiberglass Radiator Scoop .........................................................115989
Wing Fairing (Lower) ................................................................115990
Fixed Landing Gear Set .............................................................115991
Landing Gear Door Covers with Mounts .....................................115992
e-Mail: office@lindinger.at

replaCeMeNT parTs

Tail Wheel Assembly .................................................................115993
Main Gear Wheels ....................................................................115994
Hardware Set ...........................................................................115995
Engine Mount Assembly ............................................................115996
Fuel Tank (360cc) .....................................................................115997
Decal Set .................................................................................115998
Canopy ....................................................................................115999
Stabiliser Set with Elevator Halves and Rudder ...........................116000
Page 7
www.lindinger.at