7.4.6 DSPL (Display) Configuration Page
The DSPL Configuration Page allows setting the parameters for Display and Backlight Control
configuration. The aircraft lighting bus voltage can be set for either 12 or 24V input to match the aircraft
lighting bus voltage.
1. In configuration mode, use the FMS Joystick to select the DSPL Page.
2. Use the FMS Joystick to select the desired configurable item and make the desired change.
Then press the ENT Key or use the FMS Joystick to select the next item. Press the FMS
Joystick to move the cursor to the page selection menu when finished.
G3X Installation Manual – Software, Configuration, Databases, and XM Activation
190-01115-01
Page 7-11
Revision E