Available Databases - Garmin G3X Installation Manual

4. The database(s) can be updated by either highlighting UPDATE ALL and pressing the ENT key; or by
using the FMS Joystick to highlight a single database and pressing the ENT Key.
5. When the update process is complete, the screen updates the database status
6. Once the database(s) have been updated, the SD card can be removed from the unit.
7. The unit must be restarted by pressing the Restart softkey.
8. Repeat steps 1-7 for each installed GDU 37X.

7.5.2 Available Databases

Jeppesen® Aviation Data (NavData™)
The Jeppesen database contains the general aviation data (NavData) used by pilots (Airports, VORs,
NDBs, SUAs, etc.) and is updated on a 28-day cycle.
Jeppesen® Chartview™ Database
ChartView is an optional feature that must be activated by purchasing a ChartView unlock card
(010-00769-53). ChartView resembles the paper version of Jeppesen terminal procedures charts. The
ChartView database is stored on an SD memory card that remains in the display during normal operation.
The ChartView database is updated by removing the database card, updating the database on the card, and
reinserting the card. ChartView data is updated by purchasing database subscription updates from
Jeppesen Sanderson.
Terrain
The terrain database contains the elevation data which represents the topography of the earth. This
database is updated on an irregular basis.
G3X Installation Manual – Software, Configuration, Databases, and XM Activation
190-01115-01
Page 7-21
Revision E