6. Rivet the Top Bracket Assembly (115-01017-00) to the Universal Bracket Assembly
(115-00939-00) as shown in Figures C-10 and C-11.
Figure C-10. Lancair IV/IV-P GMU 44 Mounting Bracket Assembly
The assembled bracket can be shifted to accommodate for wing dihedral. Figure C-11
illustrates the offset rivet holes which may be utilized to tilt the GMU 44 up (plus) from
the mounting surface or down (minus) from the mounting surface.
G3X Installation Manual – Airframe Specific Installation Guidance
190-01115-01
NOTE
Figure C-11. Adjusting for Wing Dihedral
Page C-9
Revision E