Direct Commands From The Phone - Chamberlain Elite EL Series Programming Manual

Direct Commands From The Phone

NPB / Single Family Residence ONLY
With the Direct Command feature, you can perform various functions (e.g., unlock a
door) from your phone. This feature is Only Available for a single-family residence
or manger's phone sharing a phone line with the unit.
The "No Phone Bill" (NPB) feature Does Not dial a separate number to reach you in
your residence. The unit essentially functions as an intercom with your residence
touch-tone phone. Therefore, the NPB does not generate monthly or per call
telephone charges.
Enable or Disable Direct Commands:
When enabled, you can control the system's relays from your touch-tone phone.
Factory Setting: Enabled.
Press Then
1
Enable (1) or Disable (0). Then (#)
2
Speaking Through the Unit (Intercom Mode):
Initiate communications from a telephone through the unit at any time to greet
visitors, ward off vandals, etc.
Press (from the residence phone). If you are in the programming mode, go to
1
next step.
Press
2
You may use the activate door 1 relay(s) or hang-up key after entering step
See visitor call response keys on page 60.
21
Example:
Then
Page 67
1 2
Disables the direct commands.
120
120 .