Setting Procedure - Chamberlain Elite EL Series Programming Manual

Q u i c k R e f e r e n c e
Programming
Page
Number
57 34 Delete an Entry Code
58 37 Assign Utility Option
59 37 Assign Special Use Entry Code
60 24 Assign Each External Access Control
Device a "Door Number"
61 24 Assign "Each" Door Number to One or
More Relays
63 51 Assign Door Use Time Zone
64 53 Set Anti-Passback Entry/Exit for
Specific Devices
65 23 Set Each "Relay Mode" to get the
Appropriate Response
66 23 Set Each Relay's "Activation Time"
67 65 Request to Exit Device (REX)
68 66 Door Sensing Devices
69 64 Postal Lock Switch
70 64 Autocall Device
71 43 Set the Default Card Type
73 43 Set the Default Facility Code
74 43 Enable or Disable Ignore Facility Code
when a Card is Used
75 36 Change Entry Code Door Access
78 40 Change Card Code Door Access
80 40 Add a Basic Card
81 41 Add or Edit a Full Function Card
82 41 Add a Group of Cards at Once
Factory
Description of Task
Setting
Main keypad
assigned door1
Device 1=door 1
Device 2=door 2
Device 3=door 3
Device 4=door 4
D1=Relay 1
D2=Relay 2
D3=Relay 3
D4=Relay 4
Enabled
Disabled
All Relays=
"1-Strike"
All Relays=
10 seconds
R1=Door 1
R2=Door 2
R3=Door 3
R4=Door 4
DS1= Door 1
DS2= Door 2
DS3= Door 3
DS4= Door 4
Door 1
Enabled
All Doors
All Doors
Page 6
Programming
Procedure
57 # (entry code) #
Off 58 # (entry code) # (Option; 0=Off, 1=Daily,
2=Weekly, 3=Never) # (number of uses 1-15)
59 # (entry code) # enable/disable #
60 # (device 1-4) # (door 1-4) #
61 # (door 1-4) # (relays to activate 0000-1111) # Order
of relay is: relay 4-relay -3 -relay 2-relay 1 for an
example if you want relay 4 active you would enter
1000, if if you want relay 1 active you would enter 0001
63 # (door 1-4) # (time zone, 0-63) #
64 # (device 0-4) # (0-3; 0=disable, 1=set device
to timed anti-passback, 2=set device to true anti-
passback-entrance, 3=set device for true anti-
passback-exit) #
65 # (relay 1-4) # (1-5; 1=strike, 2=shunt, 3=CCTV,
4=alarm, 5=control) #
66 # (relay 1-4) # time (1-300 seconds)
67 # (REX number 1-4) # (select REX option:
0=disabled, 1=use your door settings or 2=use specific
relay(s) 0000-1111) #
Order of Relays are 4321
68 # (sensor number 1-4) # (select sensor option:
0=disabled, 1=use your door settings or 2=use specific
relay(s) 0000-1111) #
Order of Relays are 4321
69 # (door 0-4; 0=no postal lock) #
0000 70 # (relays to activate 0000-1111) #
Order of relays are 4321 (Factory Default: 0000)
30 71 # (26 or 30) # (Factory Default: 30)
0 73 # (0-255) #
74 # (0=disable; 1=ignore) #
75 # (entry code) # (door 0=any door, 1=door 1,
2=door 2, 3=door 3, 4=door 4) #
78 # (card code) # (facility code) # (card type,
26 or 30) # (door 0=any door, 1=door 1,
2=door 2, 3=door 3, 4=door 4) #
80 (card PIN code) # (facility code) # (card type,
26 or 30) #
81 # (card PIN code) # (facility code) (card type, 26 or
30) # (schedule for door 1, 0-63) # (schedule for door
2, 0-63) # (schedule for door 3, 0-63) # (schedule for
door 4, 0-63) #
82 # (card PIN code start range) # (card PIN code end range)
# (facility code) # (card type, 26 or 30) # (0=deactivate,
1=activate) # (schedule for door 1, 0-63) # (schedule for
door 2, 0-63) # (schedule for door 3, 0-63) # (schedule for
door 4, 0-63) # name (0-20 characters) #