Toshiba RAV-SP560AT-E Service Manual page 203

Toshiban lämmitys- ja jäähdytyslaitteiden jälleenmyyjä pääkaupunkiseudulla on Jäähdytinpalvelu RefGroup Oy
No. Part name
‚
Air-outlet cabinet
ƒ
Side cabinet
Procedure
1. Detachment
1) Perform the work in 1 of
2) Take off screws for the air-outlet cabinet
and the partition plate.
(ST1T Ø4 × 10, 3 pcs.)
3) Take off screws for the air-outlet cabinet
and the base plate.
(ST1T Ø4 × 10, 2 pcs.)
4) Take off screw for the air-outlet cabinet
and the heat exchanger.
(ST1T Ø4 × 10, 1 pc.)
5) Take off screws for the air-outlet cabinet
and the fin guard.
(ST1T Ø4 × 10, 2 pcs.)
2. Attachment
1) Put the upper left side of the air-outlet
cabinet on the end plate of heat ex-
changer, and fix it with screw.
(ST1T Ø4 × 10, 1 pc.)
2) Attach the taken-off screws to the
original positions.
1) Perform the work in 1 of
2) Take off screws fixing the inverter and
the side cabinet.
(ST1T Ø4 × 10, 2 pcs.)
3) Take off screws for the side cabinet and
the valve fixed plate.
(ST1T Ø4 × 10, 2 pcs.)
4) Take off screw for the side cabinet and
the piping panel (Rear).
(ST1T Ø4 × 10, 1 pc.)
5) Take off screw for the side cabinet and
the base plate.
(ST1T Ø4 × 10, 1 pc.)
6) Take off screws for the side cabinet and
the fin guard.
(ST1T Ø4 × 10, 4 pcs.)
www.ilmalämpöpumput.com
Heat exchanger

.
Upper side of the end Upper side of the end
plate of heat exchanger plate of heat exchanger

.
Valve fixed plate
– 203 –
RAV-SM1100/1400AT-E
RAV-SP1100/1400AT-E
Remarks
Air-outlet cabinet
Finguard Finguard
Air-outlet cabinet
Inverter Side cabinet
Side cabinet