Table of Contents
Advertisement
2. Installing the LCD remote keypad
The LCD remote keypad can be installed on the inverter and on the board (optional).
Using the unit along with a dedicated interconnect cable makes it possible to operate
the inverter by remote control (optional).
2.1 Installing the remote keypad to the inverter
Turn off the inverter, and then follow these steps.
1
Remove the serial RS485 port cover
from the inverter's main operation
panel.
To detach the cover, wrench it open
using a flat-blade screwdriver or any
other flat-tipped tool.
2
Mount the remote keypad on the
inverter's main operation panel.
Insert the connector on the remote
keypad into the RS485 port while
pushing in the lock knobs, and then
release the lock knobs to secure the
remote keypad.
3
Make sure the remote keypad is fixed
securely to the inverter.
2. Installing the LCD remote keypad
2-1
Advertisement
Table of Contents
