Smeg GW2045 Operating Instructions Manual page 26

KEY TO PROGRAMMES AND DEFAULT DOSE TABLE
SYMBOL
P1, P2, P3
COMPONENT
P1/DD
WATER INLET
STANDARD PHASE
WASH AND NEUTRALISATION PHASE
DEMINERALISED WATER RINSE
NOTE
If the demineralised water attachment has not been selected, the phase is
replaced by one using cold water.
Approximate times
programmes 1 to 8: About 10 mins, programmes 2, 3, 4, 5, 6, 7: About 1 hour
The given times are approximate and related to the three-phase 400V version.
PERSONALISABLE PROGRAMMES 6 AND 7
Programmes 6 and 7, CUSTOM 1 and CUSTOM 2 respectively, can be personalised
by authorised SMEG technicians, on the customer's request.
By default, programme 6 corresponds to "thermal disinfection at 93° C for 3' ".
By default, programme 7 corresponds to "thermal disinfection at 93° C for 10' with a
prewash".
Keep track of the specifications for any personalised programmes, using the
blank table given below.
Rev. 00
DD:
N.C.
P2.
P3
GW2045 – GW1060 Manual
DESCRIPTION
Peristaltic pumps
Detergent measuring device
Heating not controlled
STANDARD DOSE
5ml/litre
4ml/litre
9ml/litre
GW2045
5 litres
4 litres
5 litres
Pag. 25 di 43
GW1060
9 litres
6 litres
9 litres