Advertisement

LB610E
Washing Machine
Lavatrice

Advertisement

Table of Contents
loading

Summary of Contents for Smeg LB610E

  • Page 1 LB610E Washing Machine Lavatrice...
  • Page 2: Important Safety Instructions

    1 Important safety instructions This section contains safety instructions that will the detergent package. help protect from risk of personal injury or property damage. Failure to follow these instructions shall installation, maintenance, cleaning and repairing void any warranty. procedures. General safety with physical, sensory or mental disorders or unlearned or inexperienced people (including persons.
  • Page 3: Removing Packaging Reinforcement

    laundry. product to the water inlets on the product. Red kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity! inlet. edges of other furniture. Removing packaging reinforcement packaging reinforcement. Remove the packaging Removing the transportation locks taking out the packaging reinforcement.
  • Page 4: Electrical Connection

    Electrical connection Connect the product to a grounded outlet protected product is used without grounding in accordance with the local regulations. regulations. machine and to allow for easy discharge, do installation. not immerse the hose end into the dirty water protection are specified in the “Technical too long, cut it short.
  • Page 5: Correct Load Capacity

    Packaging materials of the product are them properly and sort in accordance with recycled normal domestic waste. Remove curtain attachment items. Transportation of the product and tears. the remaining water in the product completely; see, programme. dark coloured cottons release a lot of dye. order of removal procedure;...
  • Page 6 foam, poor rinsing, financial savings and finally, environmental protection. Use lesser detergent for small amounts or lightly The detergent drawer is composed of three soiled clothes. compartments: Use concentrated detergents in the - (I) for prewash recommended dosage. - (II) for main wash –...
  • Page 7 laundry, close to the lower part of the drum in future washings. selecting the prewash function. Using starch into the softener compartment as instructed on the package. washing cycle. clean cloth after using starch. Using bleaches prewash compartment. As an alternative application, select a programme with extra machine is taking water from the detergent compartment during first rinsing step.
  • Page 8: Tips For Efficient Washing

    Tips for efficient washing Clothes Light colours and Delicates/ Colors Dark colors whites Woolens/Silks (Recommended (Recommended (Recommended (Recommended temperature range temperature range temperature range Powder and stains of perform prewash. Powder recommended for detergents recommended Heavily Soiled dosages recommended produced for colours and dark for heavily soiled clothes.
  • Page 9: Operating The Product Control Panel

    4 Operating the product Control panel Display symbols Preparing the machine Make sure that the hoses are connected tightly. Plug in your machine. Turn the tap on completely. Place the laundry in the machine. Add detergent and Programme selection in accordance with the "Programme and Normally soiled, coloured, fade proof cottons or synthetic clothes (shirt, nightgown, pajamas, etc.) and lightly...
  • Page 10: Main Programmes

    laundry with a very gentle washing action to not to damage clothes. consumption. For further programme details, see "Programme cotton clothes in a short time. Main programmes main programmes. energy saving. washed with vigorous washing action for a longer washing cycle. synthetic clothes together without sorting them.
  • Page 11: Temperature Selection

    and then select the No Spin function with the help Temperature selection Whenever a new programme is selected, the maximum temperature for the selected programme appears on the temperature indicator. To decrease the temperature, press the on the display. recommended temperature for the selected programme appears on the display.
  • Page 12 Auxiliary functions Temperature Programme (°C) Cotton 1.90 1600 ‡ ‡ ‡ ‡ ‡ 90-Cold Cotton 1.30 1600 ‡ ‡ ‡ ‡ ‡ 90-Cold Cotton 0.70 1600 ‡ ‡ ‡ ‡ ‡ 90-Cold Cotton Eco 60** 1.01 1600 ‡ 60-Cold Cotton Eco 60** 0.82 1600 ‡...
  • Page 13: Auxiliary Function Selection

    Auxiliary function selection from getting wrinkled when there is no water in the this process if you want to drain the water without the programme. Furthermore, you may also select spinning your laundry. Programme will resume and complete after draining the water. auxiliary function you are going to select or cancel.
  • Page 14: Changing The Selections After Programme Has Started

    Changing the selections after Canceling the Delayed Start function programme has started and start the programme immediately: Switching the machine to pause mode middle of the delayed start time on the display stops the display indicating that the machine is paused. Changing the speed and temperature settings for auxiliary functions the programme.
  • Page 15: Maintenance And Cleaning

    door opening, then turn the Programme avoid touching of the residues in the drawer with and discharge the water in the machine. into its place after cleaning and make sure that it is Machine is in Rinse Hold mode seated well. Cleaning the water intake filters There is a filter at the end of each water intake is in this mode:...
  • Page 16 the piece out towards yourself. and then press the upper part to close. sides at the top to open. pushing downwards with a thin plastic tipped not use metal tipped tools to remove the cover. Some of our products have emergency draining hose and some does not have.
  • Page 17 6 Technical specifications LB610E Models (EN) Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net weight (±4 kg.) 220-240V~/50Hz Electrical input (V/Hz) Total current (A) 2000-2350 Total power (W) 1000 Spin speed (rpm max.) Stand-by mode power (W) 1.40...
  • Page 18: Troubleshooting

    7 Troubleshooting Press and hold Start / Pause button for 3 seconds to reset the machine to factory settings. (See "Canceling the programme") Water in the machine. This is not a failure; water is not harmful to the machine. Adjust the feet to level the machine. Clean the pump filter.

Table of Contents