Page 10
Graphs
The Graphs tab allows you to inspect statistical data over time, using plots.
For each port, you can plot any of the statistical data by using the checkboxes
on the left. Once a box is checked, the corresponding data appears on the
graph on the right. Refresh rate can be selected using the drop down list on
the left, allowing you to plot up to 10 hours of statistics.
When "packet/s" is selected, each series displays the corresponding number
of packets per second, except for the bandwidth usage which is displayed in
bytes per second. When "percentage" is selected, each series is displayed in
term of percentage of the total number of packets, except for the bandwidth
usage which is displayed in percentage of the total bandwidth.
Both graphs history can be reset using the Clear History button on the left.
Disconnecting the PROFISHARK also reset the graphs' data.