Leds - Fritz! Box 7490 Installation And Operation Manual

LEDs

2.3 LEDs
The FRITZ!Box 7490 has five LEDs, which flash or light up to
display various connection statuses and events.
LED Condition
Power / on
DSL
flashing
Internet on
flashing
Fixed on
Line
flashing
WLAN on
flashing
Info on
flashing
flashing red
FRITZ!Box 7490
Meaning
Device has electrical power and the DSL line is ready for operation
Device has electrical power and the connection to DSL is being es-
tablished or has been interrupted
Telephone connection to the Internet is active
Messages in your mailbox
• This function must be supported by your telephony provider
Telephone connection to the landline network active
Messages in your mailbox
• This function must be supported by your telephony provider
Wireless LAN function is enabled
• Switching the wireless LAN function on or off
• Adopting the wireless LAN settings
• Performing WPS
• WPS procedure aborted: More than two wireless devices are
performing WPS at the same time. Repeat the WPS procedure.
• The LED signals an event specified in the user interface under
"System / Buttons and LEDs / "Info" Display"
• Stick & Surf procedure with FRITZ!WLAN USB Stick from AVM
concluded
• Updating FRITZ!OS
• New messages on the FRITZ!Box answering machine, online
meter reached the defined value, or another event defined in
the user interface under "System / Buttons and LEDs / "Info"
Display" is signaled
• Stick & Surf procedure with FRITZ!WLAN USB Stick from AVM in
progress
• Registration procedure for a DECT handset in progress
Error:
• Open the FRITZ!Box user interface, see
• Follow the instructions on the "Overview" page.
16
page 32
.