Leds - Fritz! Box 7570 Installation, Configuration & Operation

LEDs

13.4 LEDs
LED Status
INFO on
flashes
LAN 1 - LAN 4 on
flashes data are transmitted over the LAN connection
WLAN on
flashes the WLAN function is being enabled or disabled
Update on
DECT on
flashes logon procedure for a DECT handset in progress
Online on
Power/DSL on
flashes
Internet on
FRITZ!Box Fon WLAN 7570 vDSL
Twelve LEDs are built into the top of the FRITZ!Box Fon
WLAN 7570 vDSL, which flash or light up to display various
connection statuses.
Meaning
a telephone connection between two Internet telephony
subscribers is active; the call is free of charge (this function
must be supported by your Internet telephony provider)
signals an event that can be configured freely by the user
the Stick & Surf procedure has been concluded
the value specified for the online meter has been reached
signals an event that can be configured freely by the user
Stick & Surf procedure in progress
logon procedure for a DECT handset in progress
a network cable is plugged in and the connection to the comput-
er is working
the WLAN function is enabled
firmware is being updated
the DECT function is enabled
a VoIP connection is configured
FRITZ!Box on standby
the device has electrical power and the DSL/VDSL line is
ready for operation
the device has electrical power
the connection to DSL/VDSL is being established or has
been interrupted
a telephone connection to the Internet is active
117