Advanced; Routing - Planet ADN-4101 User Manual

The following table describes the parameters and buttons on this page:
Field
Direction Select
WAN Setting
WAN Interface
Services Allowed
Add
Reset

3.6 Advanced

In the navigation bar, click Advanced. On the Advanced page that is displayed contains Routing, NAT, Port
Mapping, IP QoS, SNMP, Parent Control, Schedules Reboot, and Others.

3.6.1 Routing

Choose Advance > Routing. This page contains Static Route and RIP.
3.6.1.1 Static Route
Click Static Route in the left pane and the page shown in the following figure appears. This page is used to configure
the routing information. You can add or delete IP routes.
Select the router interface. You can select LAN or WAN. In this example,
WAN is selected.
You can choose Interface or IP Address.
Choose the interface that permits data packets from WAN to access the
router.
You can choose the following services from WAN: Web, Telnet, SSH, FTP,
TFTP, SNMP or PING. You can also choose all the services.
After setting the parameters, click it to add an entry to the Current ACL Table.
Click it to refresh this page.
49
802.11n Wireless ADSL2/2+ Router
Description
ADN-4101