Tr-069 - Planet ADN-4101 User Manual

3.5.5 TR-069

Choose Service > TR-069 and the page shown in the following page appears. On this page, you can configure the
TR-069 CPE.
The following table describes the parameters on this page:
Field
ACS
URL
User Name
Password
Periodic Inform Enable
Periodic Inform Interval
Connection Request
User Name
Password
Debug
Show Message
CPE sends GetRPC
Skip MReboot
Delay
Auto-Execution
The URL of the auto-configuration server to connect to.
The user name for logging in to the ACS.
The password for logging in to the ACS.
Select Enable to periodically connect to the ACS to check whether the
configuration updates.
Specify the amount of time between connections to ACS.
The connection username provided by TR-069 service.
The connection password provided by TR-069 service.
Select Enable to display ACS SOAP messages on the serial console.
Select Enable, the router contacts the ACS to obtain configuration
updates.
Specify whether to send an MReboot event code in the inform message.
Specify whether to start the TR-069 program after a short delay.
Specify whether to automatically start the TR-069 after the router is
powered on.
47
802.11n Wireless ADSL2/2+ Router
Description
ADN-4101