System Requirements - Planet ADN-4101 User Manual

Rear Panel
The following table describes the interfaces and buttons of the device.
Interface/Button
WPS/ WLAN
LINE
LAN1, LAN2, LAN3, LAN4
POWER
ON/OFF
RESET

1.2 System Requirements

Make sure first that you have prepared these following items to guarantee the router can work normally.
Services subscriptions.
An 10/100Mbps Ethernet card installed on your PC.
Hub or Switch. (Attached to several PCs through one of Ethernet interfaces on the device).
Operating system: Windows Vista, Windows 7, Windows 98SE, Windows 2000, Windows ME, or Windows XP.
Internet Explorer V5.0 or higher, or Netscape V4.0 or higher, or firefox 1.5 or higher.
Figure 1 Rear panel
Press the button and hold it for 1 second to enable WLAN.
Press the button and hold it for 3 or more than 3 seconds to initialize WPS
negotiation.
RJ-11 interface, for connecting the interface of the telephone set through the
telephone cable.
RJ-45 interface, for connecting the Ethernet interface of a computer or an
Ethernet device.
Power interface, for connecting the interface of the power adapter (12V DC,
0.8A).
Power switch, power on or off the device.
Restore to factory defaults. To restore factory defaults, keep the device
powered; push a paper clip into the hole to press the button for over 3
seconds and then release.
5
802.11n Wireless ADSL2/2+ Router
Description
ADN-4101