Advanced Settings - Planet WNRT-300 User Manual

Broadcast SSID
WMM
Data Rate
Associated Clients
Enable Mac Clone
(Single Ethernet Client)
Enable Universal
Repeater Mode
(Acting as AP and client
simultaneously)

4.4.2. Advanced Settings

Choose menu "Wireless  Advanced Settings", and you can configure the advanced settings for the
wireless network in this page. After the configuration, please click the "Apply Changes" button to save
the settings.
If you enable "Broadcast SSID", every wireless station located within
the coverage of the WNRT-300 can discover its signal easily. If you are
building a public wireless network, enabling this feature is
recommended. In private network, disabling "Broadcast SSID" can
provide better wireless network security.
Default is "Enabled".
WMM function can guarantee the packets with high-priority messages
being transmitted preferentially.
Default is "Enabled".
Default is "Auto".
C lick the "Show Active Clients" button to show the status table of
active wireless clients.
Enable Mac Clone.
It is only available in Client Mode. Universal Repeater is a technology
used to extend wireless coverage. To enable Universal Repeater
Mode, check the box and enter the SSID you want to broadcast in the
field below. Then please click "Security" submenu for the related
settings of the AP you want to connect with.
-26-
User's Manual of WNRT-300