Table of Contents
Advertisement
●
Rear
6. Main power switch
7. Power connector
8. Input signal connectors
9. USB upstream port
10. Stereo mini jack
11. Handle
12. USB downstream port
13. Headphone jack
14. Security lock slot
15. Speakers
16. Stand
*2
*3
17. Cable holder
*2 An optional arm (or optional stand) can be attached by removing the stand section (see
*3 For the cable holder attachment procedure, see
14
15
6
7
Turns the main power on or off.
Connects the power cord.
Left: DVI connector
Middle: HDMI connector
Right: DisplayPort connector × 2
Connects to the USB cable when using software that needs a USB connection, or when using the USB Hub function.
Connects to a stereo mini jack cable.
This handle is used for transportation
Connects to a peripheral USB device.
The "CHARGE" port supports quick charging
Connects to headphones.
Complies with Kensington's MicroSaver security system.
Outputs audio.
Adjusts the height and angle (tilt and swivel) of the monitor.
Holds the monitor cables.
"6-3. Attaching/Detaching the Cable Holder" (page
12
11
13
16
8
9
10
(page
31).
"6-1. Attaching the Optional Arm" (page
47).
- 10 -
Chapter 1 Introduction
17
43)).
Advertisement
Table of Contents
Troubleshooting
