Eizo FlexScan EV3237 User Manual page 22

Function
EcoView Sense
Advanced Time
Settings
Sensitivity
Reset
Setting Range
On When set to "On", the sensor on the front of the
Off monitor detects user movement. When the user
moves away from the monitor, it automatically
shifts to power saving mode and does not display
images on the screen in order to reduce power
consumption. When the user comes near the
monitor again, it recovers from power saving mode
and displays images.
The sensitivity of the sensor and time until
power saving mode is activated can be set in the
"Advanced Settings" according to the monitor usage
environment and movement of the user.
5, 30 sec Specifies the time from when the user leaves the
1, 3, 5, 10, 15, 30, 45, monitor until the "No Presence detected" message
60 min appears. The monitor shifts to power saving mode
about 20 seconds after the message is displayed.
Level 5 When the setting level is high ("Level 5" at
Level 4 maximum), even minor movements of the user are
Level 3 detected, which prevents the monitor from readily
Level 2 shifting to power saving mode. On the other hand,
Level 1 when the setting level is low ("Level 1" at minimum),
only major movements of the user are detected,
which allows the monitor to readily shift to power
saving mode.
- Return the advanced settings to their default values. -
- 22 -
Description
• At the time of shifting to power saving mode,
• When "Power Save" on the Preferences menu
-
• The EcoView Sense function is activated when
• To use the monitor comfortably, increase the
Chapter 2 Basic Adjustment/Setting
Note
a message that indicates the transition is
displayed.
is set to "Off", the EcoView Sense setting is
disabled.
the sensor on the front of the monitor detects
the movement of heat. Therefore, the sensitivity
should be changed depending on the typical
user's clothes or typical room temperature. If
the monitor shifts to or recovers from power
saving mode contrary to your expectations, try
changing the setting level.
sensitivity for high temperatures, because the
detection sensitivity decreases. Reduce the
sensitivity for low temperatures because the
detection sensitivity increases.