Table of Contents
Advertisement
Function
Setting Range
Power Save
On
Off
Eco Timer
Off
0, 1, 2, 3, 5, 10, 15,
20, 25, 30, 45 min,
1, 2, 3, 4, 5 h
Power Indicator
On
Off
Monitor Reset
-
Description
The monitor can be set to enter power saving mode according to
the state of the PC.
The monitor changes to power saving mode about 15 seconds
after signal input ceases to be detected.
When the monitor has shifted to power saving mode, images are
not displayed on the screen.
• Exiting power saving mode
- If the monitor receives input, it automatically exits power
saving mode and returns to the normal display mode.
The monitor can be turned off automatically after a specified
amount of time has passed in power saving mode.
Select the time to wait before turning off power to the monitor.
The power indicator (white) can be turned off during screen
display.
Restore all settings to their default values except for the following
settings.
• PbyP/PinP Picture Setup
• Settings on the "Administrator Settings" menu
- 32 -
Chapter 3 Advanced Adjustment/Setting
Note
• At the time of shifting to power saving mode, a
message that indicates the transition is displayed 5
seconds in advance.
• During PbyP/PinP display, the monitor only enters
power saving mode after all the PCs have entered
power saving mode or have been switched off.
• Turning off the main power switch or unplugging the
power cord completely shuts off power supply to the
monitor.
• When the monitor is in power saving mode, devices
connected to the USB downstream port will still
work. Therefore, power consumption of the monitor
varies with connected devices even in power saving
mode.
• Power consumption varies even when the stereo
mini jack cable is connected.
-
-
• For details on default settings, see
Settings" (page
54).
"Main Default
Advertisement
Table of Contents
Troubleshooting
