Table of Contents
Advertisement
Display
Setting
PbyP
Color Mode
Sound Source
Layout
1 to 4
Setting
Range
Active Window
Select the application range when setting the color mode.
Whole Screen
(For details on color mode settings, see
Display Modes (Color Modes)" (page
• "Active Window"
Apply separate color modes to each displayed window.
• "Whole Screen"
Apply the same color mode to all displayed windows.
Active Window
Select the source of audio to output from the monitor.
DisplayPort 1
• "Active Window"
DisplayPort 2
Output the audio of the window selected using the
HDMI
operation button on the front of the monitor.
DVI
• "DisplayPort 1/DisplayPort 2/HDMI/DVI"
Always output the audio input from each connector. Note
that audio from connectors that do not correspond to a
displayed window is not output.
Select the screen layout.
Layout 1
Layout 2
Layout 3
Layout 4
Layout
Layout 5
Recommended
1/2: 1920 × 2160 1/2: 3840 × 1080
resolution of
*1
each screen
*1 In the default setting, changing the layout automatically changes to the above resolutions (see
Resolution" (page
DisplayPort 1
Select the input connector to display at each position based
DisplayPort 2
on the selected layout.
HDMI
DVI
Description
"2-3. Switching
15).)
1
2
1
1
2
2
2/3: 1920 × 1080
37)).
- 17 -
Chapter 2 Basic Adjustment/Setting
Note
• The "Brightness" and "Overdrive" settings are
not related to this setting and the value of the
window selected using the
button on the front of the monitor is applied to
the entire screen.
-
3
4
2
1
1
3
3
2
1: 1920 × 2160
1/2: 1920 × 1080
3: 1920 × 2160
• The same connector cannot be set to more
than two positions. For this reason, when
changing the input connector for a certain
window, if an input connector already set
to another window is selected, the input
connectors are exchanged automatically.
operation
5
1
3
2
4
1/2/3/4:
1920 × 1080
"Auto PbyP
Advertisement
Table of Contents
Troubleshooting
