Table of Contents
Advertisement
Problem
2. The message below appears.
• The message shows that the input signal is out
of the specified frequency range.
Example:
This message appears when the signal is not input correctly even though the monitor is functioning properly.
• Check whether the PC is configured to meet the resolution and vertical scan frequency requirements of the monitor (see
"1-3. Supported Resolutions" (page
• Reboot the PC.
• Select an appropriate setting using the graphics board's utility. Refer to the User's Manual of the graphics board for
details.
- 39 -
Possible cause and remedy
11)).
Chapter 5 Troubleshooting
Advertisement
Table of Contents
Troubleshooting
