Eizo FlexScan EV3237 User Manual page 21

Function
Auto EcoView
Advanced Maximum Brightness
Settings Minimum
Ambient Light
Reset
EcoView Optimizer 2
Setting Range
On The ambient light sensor on the front of the monitor
Off detects the ambient brightness to automatically
adjust the screen brightness to a comfortable
level using the Auto EcoView function. The power
consumption of the backlight can be curtailed by
adjusting the brightness to an appropriate level.
This function can also mitigate eye strain and
tiredness caused by a screen that is too bright or
too dark.
Use the "Advanced Settings" to set the automatic
adjustment range to suit the monitor's usage
environment or personal preference.
0 to 100 Set the range for automatic brightness adjustment.
By setting the maximum value and minimum value
of the adjustment range in advance, the brightness
will be adjusted automatically within the set range.
Bright Using the default setting is recommended.
Standard (Default setting: "Bright" for maximum value, "Dark"
Dark for minimum value)
- Return the advanced settings to their default values. -
On The monitor automatically adjusts the screen
Off brightness according to the white level of the input
signal.
This function can reduce power consumption while
maintaining the brightness specified by the input
signal.
- 21 -
Description
• Be careful not to block the ambient light sensor
• Even when the Auto EcoView setting is "On",
• When "DICOM" is selected for the color mode,
• The maximum and minimum brightness values
• For details on the "Ambient Light" setting, refer
• The setting is turned "Off" in the following
• When set to "On", the appearance of pale
Chapter 2 Basic Adjustment/Setting
Note
on the lower side of the monitor when using the
Auto EcoView function.
the operation button on the front of the
monitor or color adjustment can be used to
change the "Brightness" to suit your personal
preference. Moreover, the manner in which
the Auto EcoView function changes brightness
also differs according to the changed value.
the Auto EcoView setting is turned "Off".
cannot be set to the same value.
to our web site (http://www.eizoglobal.com).
cases:
- When "sRGB", "Movie" or "DICOM" is
selected for the color mode.
- During PbyP/PinP display
colors may change. If this bothers you, set this
function to "Off".