During a software or network update, you will see the
following:
1.
A green LED flashes on the device (it will begin to
flash slowly towards the end of the download
process).
2.
The device will appear to power off and an amber
LED will flash quickly.
3.
A purple LED will flash slowly.
4.
The device will restart and a solid amber LED,
RSSI (with no signal) and battery e-ink will appear.
5.
A purple LED will begin to flash and then turn solid.
6.
No LED will be present.
7.
A solid amber LED, antenna with no RSSI and
battery appears.
8.
A green LED with signal strength appears.
50
2E. System Menu
Power Management
Click
Power Management
disable device LEDs and to configure Automatic
Shutdown.
in the System menu to