Power Management; Using The Battery - Novatel MiFi 2200 User Manual

Hide thumbs Also See for MiFi 2200:
Table of Contents

Advertisement

Power Management

Your device will work from its battery or when plugged into a power source.
Battery — The battery will last for up to four hours. Charge the battery by plugging in the AC
adapter. While the battery is charging the Power Button LED will be solid amber. When the
battery is fully charged, it will be solid green.
Wall power — Use the device by plugging it into a wall socket. The MiFi Device battery will
charge while it is plugged in.

Using the Battery

WARNING!
To avoid risk of explosion, never dispose of batteries in a fire.
Battery life depends on the network, signal strength, temperature, features, and accessories
used.
Always use Novatel Wireless original batteries and chargers. The warranty does not cover
damage caused by non-Novatel Wireless batteries and/or chargers.
New batteries or batteries stored for a long time may take more time to charge.
When charging your battery, keep it near room temperature.
When storing your battery, keep it uncharged in a cool, dark, dry place.
Never expose batteries to temperatures below -10
the device in an unattended vehicle since temperatures may be outside the temperature
range for this device.
It is normal for batteries to gradually wear down and require longer charging times. If you
notice a change in your battery life, it is probably time to purchase a new battery.
Some batteries perform best after several full charge/discharge cycles.
NOTE
Contact your local recycling center for proper battery disposal.
Before using the MiFi 2200 Device, read the battery safety information in the "Safety Hazards"
section of this guide. [See
Proper Battery Use and Disposal
C (14
F) or above 45
o
o
.]
(page 69)
9
C (113
F). Never leave
o
o

Advertisement

Table of Contents
loading

Table of Contents