Disassembling The Slide - Siemens SL 10 Service Manual

three major parts of the telephone
a) Slide, b) Top of base, c) Bottom of base

4.2.3 Disassembling the Slide

1. Unscrew the countersunk-head screw (A)
2. Next, release the lower catch (B)
3. Then release the six lateral catches (1-6 )
1. After releasing the catches, remove the bottom part of the
slide.
2. Now remove the MMI board from the bottom part of the
slide by raising the board (1.) and pushing it toward the
keypad (2.).
Attention: Do not crease or damage the flexible cable
on the lower side of the MMI.
1. Finally, remove the dust protection frame, the keypad
mat and the loudspeaker from the top part of the slide.
You now have disassembled the slide completely.
Service Manual SL10
Sm_sl10_lvl2_v11.doc
1. Now detach the flexible cable
from the plug on the control
module by undoing the retaining
clip on the plug and then pulling
the cable out.
1. Now you have separated the
V1.1
Page 8 of 22
Private Communication Systems
Mobile Phones
a) b)
6
5
4
A
2.
1.
c)
3
2
1
B
PN MP ST
R. Fleuren
05/98