Siemens SL 10 Service Manual page 7

1. Turn the mobile over and
push the metal strip through
until it is visible above the
keypad.
1. Then use your thumb to press the slide up to separate it from
the base. The second stop which is mounted at the bottom of
the slide has to be released at the same time. To do so, push
the bottom of slide upwards and continue pushing the slide
with the thumb.
The metal blade can be removed when the stop on the top of
base is visible completely.
1. Remove spring and stop from top of base.
Attention:
Flexible cable is very sensitive to any kind of mechanical
damage (e.g. bending, snapping).
1. Use the catch lever to unlock the six catches (see figures
below) in order to separate the top part of the base from the bottom part of the base.
6
4
2
Service Manual SL10
Sm_sl10_lvl2_v11.doc
5
3
1
Page 7 of 22
Private Communication Systems
V1.1
Mobile Phones
PN MP ST
R. Fleuren
05/98