Recommended Components For Connection; Sca2 Type Interface Connector - Fujitsu MAG3182FC SERIES Product Manual

4.3.2 Interface connector
The connector for the fibre channel loop bus is an unshielded SCA-2 connector conforming to
SCSI-3 type which has two 20-pin rows spaced 1.27 mm (0.05 inch) apart. Figure 4.12 shows the
fibre channel connector. See Section C.5 in Appendix C for signal assignments on the connector.
For details on the physical/electrical requirements of the interface signals, refer to Sections 1
Interface Specifications.
4.3.3

Recommended components for connection

Applicable model
MAF3364FC Interface connector
MAG series (CN1)
4 - 12
Figure 4.12 SCA2 type interface connector
Name
Connector
C141-E078-02EN
ESD contact
Par number Manufacturer
787317-1 AMP