4.1.2
Mounting
The permissible orientations of the IDD are shown in Figure 4.3, and the tolerance of the angle is
±5° from the horizontal plane.
(a) Horizontal –1
(d) Vertical –2
4.1.3
Notes on mounting
(1)
Mounting frame structure
Special attention must be given to mount the IDD disk enclosure (DE) as follows:
4 - 4
(b) Horizontal –2
Direction of
gravity
(e) Upright mounting –1
Figure 4.3
IDD orientation
C141-E078-02EN
(c) Vertical –1
(f) Upright mounting –2