End Point - Fly Sky FS-GT3 Instruction Manual

MODELS FS GT3
Digital propotional radio control sytem
END POIN T
.
;
.
Function Instruction:
use this when performing left and right steering angle adjustments, throttle high side/brake
side operation amount adjustment, and channel 3 servo up, side/down side operation amount
adjustment during linkage.Correct the maximum steering angle and left and right steering
angles when there is a difference in the turning radius due to the characteristics, etc. of the
Vehicle
Operation method
To choose the channel by UP DOWN button use the current control Stick direction
control disc or throttle ouch or the AUX switch to choose the single side Then adjust
the data by the knob then save the data and press ENTER to quit the Adjustment if
press EXIT it means quit the system directly without saving the data
Parameter Introduction
CH channel name
UP: the first haft part of outputs
DN: the second half part of outputs.
ST means direction channel
TH means throttle channel
AUX: the assistant channel(channel 3)
Range from -100% to 100%
17
Http www flysky cn com