Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
V1.0
GT3B Voltage Requlator Install Instructions
Written By
Austin Hutchison
Step 1:
Remove 4 screws located on top of the radio.
1
Overkillrc.com
Advertisement
Related Manuals for Fly Sky FS - GT3B
Summary of Contents for Fly Sky FS - GT3B
- Page 1 V1.0 GT3B Voltage Requlator Install Instructions Written By Austin Hutchison Step 1: Remove 4 screws located on top of the radio. Overkillrc.com...
- Page 2 V1.0 Step 2: There are small plastic latches that also hold the top in place. The easiest way to pull the top cover off is to push these latches open, but it may knar up the plastic alittle. If you don’t wish to knar up the plastic you can take a chance and muscle the top cover off, however this may lead to worse...
- Page 3 V1.0 Step 4: Gently pull the board towards the front of the radio to pull the power button out of its slot. Now twist it so the screen side is resting on the antenna. The antenna cable is short and has a fragile connection to the rf module.
- Page 4 V1.0 Step 7: Now stick the regulator in position, make sure the pins are touching, don’t need to be much. Step 8: Solder the pins together…It is easier to-do if you pull the power button Step 9: Put it back together Step 10: Enjoy long battery life Overkillrc.com...