Table of Contents
Advertisement
3. Install the ribbon onto the ribbon supply spindle.
Note: Make sure the ribbon is set at the centre of the spindle.
4. Install the paper core onto the ribbon rewind spindle.
Note: Make sure the paper core is set at the centre of the spindle.
5. Thread the ribbon through the ribbon sensor slot and print-head.
6. Stick ribbon onto ribbon rewind paper core, keeping the ribbon flat and wrinkle-free.
7. Wind the ribbon rewind spindle clockwise roughly 3~5 circles until ribbon is smooth, properly
stretched and wrinkle-free.
RIBBON
RIBBON
SENSOR
8
Advertisement
Table of Contents
