Table of Contents
Advertisement
Speed:
Use this option to setup print speed. Each increment/decrement is 1 ips. Press
the print speed, and press
printer. Press
Note: The printer driver may send out the SPEED command which will overwrite the setting
set from the front panel.
Density:
Use this option to setup printing darkness. The available setting is from 0 to 15, and the step is 1.
Printer default density is 8. You may need to adjust your density dependent on the media in use.
Press
and
enable the setting. Press
Note: The printer driver may send out the DENSITY command which will overwrite the setting
set from the front panel.
Direction:
The direction setting value is either 1 or 0. Use this option to setup the print-out direction. Printer
default print-out direction is: DIRECTION 0.
Press
key to set the direction as 1, and
setting. Press
key to decrease print speed. Press
key to cancel the setting and return to the previous menu.
to increase/decrease the printing darkness. Press
key to cancel the setting and return to the previous menu.
key to cancel the setting and return to the previous menu.
to set it as 0, and
13
key to raise
key to set it into
key to
key to enable the
Advertisement
Table of Contents
