Table of Contents
Advertisement
This option is used to set the RS-232 parity. The default setting is "None". Press and buttons to
select the different parity and press button to set the value into printer. When you enter this list, the
parity in the right side of ">" is the printer current setting. Press key to cancel the setting and return to
the previous menu.
Serial Comm: Data Bits:
This option is used to set the RS-232 Data Bits. The default setting is "8" data bits. Press
and
buttons to select the different Data Bits and press
button to set the value into
printer. When you enter this list, the Data Bits in the right side of ">" icon is the printer current setting.
Press
key to cancel the setting and return to the previous menu.
Serial Comm: Stop Bit/Bits:
This option is used to set the RS-232 Stop Bits. The default setting is "1" stop bit. Press
and
buttons to select the different Stop Bits and press
button to set the value into
printer. When you enter this list, the option to the right side of ">" icon is the printer current setting.
Press
key to cancel the setting and return to the previous menu.
25
Advertisement
Table of Contents
