Table of Contents
Advertisement
Memory full
(Flash/DRAM)
SD card unusable
PS/2 port not working
Flash or DRAM memory full.
SD card damaged or inserted incorrectly.
Non-approved SD card.
Did not turn off power prior to plugging in
PS/2 keyboard.
PS/2 keyboard damaged.
PS/2 keyboard not plugged in correctly.
No BAS file (label template) downloaded
to printer.
Delete unused files in
FLASH/DRAM.
NOTES:
Max. number of DRAM files is
50 (LabelStation Industrial)
Max. user addressable DRAM
space is 256KB (LabelStation
Industrial)
Max. number of Flash files is
256.
Max. user addressable Flash
space is 2560KB (LabelStation
Industrial)
Use supported SD card.
Re-insert SD card correctly.
For supported/approved SD
cards, refer to relevant section
in this manual.
Plug in PS/2 keyboard with
printer switched off.
Check keyboard is not
damaged.
Check required file has been
downloaded to printer.
40
continued...
Advertisement
Table of Contents
