Table of Contents
Advertisement
Note: The printer driver may send out the OFFSET command which will overwrite the setting
set from the front panel.
Shift X & Shift Y:
This option is used to fine tune print position. Press the
button to move the cursor from left
digit to right digit, and press the
button to set the value from "+" to "-" or "0" to "9".
Press
the
button to set the value into printer. Press
key to cancel the setting and return
to the previous menu. The default value is +000.
Note: The printer driver may send out the SHIFT command which will overwrite the setting set
from the front panel.
Reference X & Reference Y:
This option is used to set the origin of printer's horizontal and vertical coordinates system.
Press
the
button to move the cursor from left digit to right digit, and press the
button to set
the value from "0" to "9". Press the
button to set the value into printer. Press
key
to cancel the setting and return to the previous menu. The default value is 000.
Note: The printer driver may send out the REFERENCE command which will overwrite the
setting set from the front panel.
Code Page:
Use this option to set the code page of the international character set. For more information about
the code page, refer to the programming manual. When entering the code page list, the code page
to the right side of ">" icon is the printer current setting. Press the
and
to select the
code page, and press the
button to enable the setting. Press
key to cancel the
setting and return to the previous menu.
Note: The printer driver may overwrite the setting set from the front panel.
15
Advertisement
Table of Contents
