Table of Contents
Advertisement
2. Remove the ribbon to expose the print head.
3. Use a cotton swab and ethanol (or head cleaning pen) to clean the print head surface.
Platen Roller
1. Turn printer off and allow print head to cool for one minute.
2. Remove the label stock to expose the roller.
3. Wipe the platen roller while manually rotating it. Use ethanol and lint-free cloth.
Tear Bar/Peel Bar
Use lint-free cloth with ethanol to wipe it as needed.
Sensor
Gently blast with compressed air periodically to remove fluff and dust.
Exterior
Wipe with damp cloth as necessary.
Interior
Brush or carefully vacuum clean as needed to prevent build-up of dust and debris.
Notes:
1. Do not touch print head by hand. You will contaminate it and possibly burn yourself.
2. Always use 100% Ethenol. DO NOT use medical alcohol, which may damage the print head.
45
Advertisement
Table of Contents
