Step 11: Install Toekick; Step 12: Set Temperature Controls; Step 13: Start Icemaker; Problem Solving - Monogram ZIRS36N LH Installation Instructions Manual

Step 11
Install
Toekick
Step 12
Temperature
Controls
Step 13
Start
Icemaker
Problem
Solving
Power Switch
• A standard toekick is supplied. Install with 2 screws
provided, adjust to desired height and tighten screws.
Important: The vented toekick must remain unobstructed for
proper air circulation and operation.
• Set temperature control at "5".
Important : Allow 24 hours for temperatures to stabilize before
making adjustments.
• Start the switch to I (on). The green light will come on
and the icemaker will begin operation automatically.
• Be sure nothing interferes with the sweep of the feeler
arm.
• Discard the first few batches of ice cubes.
• To turn the icemaker off, set the switch to O (off).
Allow 45 minutes for the icemaker to resume
operation.
Operation of Refrigerator and Freezer
If the product does not operate after checking the
installation instructions:
• Check to be sure power cord is plugged in the wall
outlet.
• Check to be sure that fuse or circuit breaker is
turned on.
If any of these problems persist:
Call for Monogram local service in your area,
1-800-444-1845.
Installation
36" Stainless Steel Refrigerators, Freezers
Cleaning the Stainless Steel Exterior
Stainless Steel has some unique cleaning
characteristics. In order to keep your refrigerator or
freezer looking like new, we suggest cleaning it with
Stainless Steel Magic or a similar product.
Stainless Steel Magic is available at Ace, True Value,
Home Depot, Servistar, HWI and other leading stores.
It is also available through GE Parts by calling
1-800-626-2002. Order part number WX10X15.
13