First Degree Fitness E-520 Fluid Rower Owner's Manual page 7

Step 4: Rear Leg Installation
Requires 4x M10x47.5 bolt, 4x M10 washer, 4x M6x20mm bolt and 4x M6 washer.
Note: the M10x47.5 bolts/washers are to be installed on the outside of the Seat Rail, while the smaller,
M6x20mm bolts and washers are fitted on the inside.
4x M10x47.5mm
Bolt and M10
Washer
Free Computer Stalk Mount
Release Rowing Handle
Step 5:
Lower your E-520 to the operational position and free
the Heel Support Plate, Rowing Handle and Computer
Stalk Mount to complete the assembly.
7
4x M6x20mm Bolt
and M10 Washer
M6x20mm
Bolt and M6
Washer
Free Heel Support Plate
Rear Leg
M10x47.5mm
Bolt and M10
Washer