Advertisement
Front Leg Assembly
Caution:
Step 1:
Requires the Mainframe, 2x Front Leg, 8x M10x20mm bolt and washer. Remove Main-
frame from box and lay on soft surface such as carpet as shown. Tilt frame upward slightly and install
rower Front Leg with 4x M10x20mm bolt & washer. Repeat for other leg.
Step 2:
Rower Belt Pulley
Hint: Use mouse pad or
soft cloth under rower belt
pulley to protect from
scratches/scuffing
Slowly stand the rower upright. On a hard surface, it is
recommended to place something soft under the Rower
Belt Pulley to avoid surface scratches.
4
Do not free the Rowing Handle, Heel Adjuster or Computer Stalk before
assembly is complete.
Install Legs with Transport
Wheels facing forward
2x Front Leg
8x M10x20mm bolt & washer
Tilt Mainframe upward slightly to install the lower leg
Locate and unwrap the Bungee Shock
Cord from the frame before moving on
to the installation of the Seat Rails.
Mainframe
Bungee
Shock Cord
Hide quick links:
Advertisement
