First Degree Fitness E-520 Fluid Rower Owner's Manual page 15

Tank Belt Adjustment
Tank Tensioning Bolt
Step 1
End Cap
Step 2
Step 3: Loosen both the rear and front
tank bolts slightly as shown left. Remove
front Rubber Belt Cover.
Step 4: Using a 6mm Allen Key, tighten
the Belt using the Tank Tensioning Bolt
until the belt no longer slips during hard
rowing.
Note: Do not over tighten tank bolts.
Tip: Twist the belt by hand to gauge
tightness. Correct tension should be ob-
tained when no longer able to twist more
than 60 degrees.
15
Step 1: Remove large metal in-
spection plate as shown above.
Step 2: Using a long tool, push
out the rear end cap as pictured
below left. This will give you ac-
cess to the tank tensioning bolt
(shown left & below right).
Tank Tensioning Bolt
Step 4
Step 3