Motion Recording - Nuvico EVLite EVL-400 Instruction Manual

5.2 MOTION RECORDING

Please verify that the motion option has been enabled under RECORD SETUP menu. Also, verify that
the settings for motion grids, motion sensitivity level and record time have been configured under the
MOTION SETUP menu. The motion grids are all activated by default, thus, unless it has been
deactivated, the motion grid setting may be ignored.
Press the record button and the record icon will appear as
shown on the left. The DVR will be on record standby
mode until motion is triggered. The DVR does not record
as log as there is no motion.
Motion recording icon will appear on the channel motion
was detected. The channel number will turn yellow as it
starts to record. The illustration to the left shows channel
1 in motion recording mode. The duration of the recording
will be based on the RECORD TIME setting under
MOTION setup.
- 38 -