Pan / Tilt / Zoom Control - Nuvico EVLite EVL-400 Instruction Manual

4. PAN / TILT / ZOOM CONTROL

The DVR comes with an extensive list of PTZ cameras. Please read the PTZ manufacturer's
instruction manual and understand its settings fully prior to proceeding to any attempts to connect and
control the PTZ camera through the DVR. Please refer to the PTZ Channel and PTZ Model Select
under DISPLAY setup.
When the P/T/Z/FOCUS button is pressed, the display automatically changes to the single channel
view mode. Press the appropriate channel number to control the PTZ camera. Some PTZ control
functions can only be accessed using the remote controller, so please have the remote controller
handy when using the PTZ control interface.
Switch to Full Interface (MENU)
Help Screen
(ENTER)
Pan Left
Zoom In
The layout of the PTZ interface conforms to the layout of the front of the DVR or the remote controller.
Menu button is the guide anchor position for all other buttons. When in PTZ interface mode, all
buttons used for the PTZ related operation.
When HELP button (ENTER on remote controller) is pressed, HELP GUI (Graphic User Interface) will
be displayed as above:
Note: Some buttons and functions only work with NUVICO PTZ models in NUVICO protocol.
Exit (CANCEL)
Tilt Up
Pan Right
Zoom Out
Tilt Down
- 34 -